Sails
| Part No. | Description | Quant. per Boat | Price (2026) |
| Mainsail Furling | 1,000 | ||
| Genoa Furling | 1,000 |
| Part No. | Description | Quant. per Boat | Price (2026) |
| Mainsail Furling | 1,000 | ||
| Genoa Furling | 1,000 |
| Pos. | Part No. | Description | Quant. per boat | Beginning hull number | Ending hull number |
| 10 | 216616 | INSTRUMENT PANEL YANMAR CR YD25 | 1,000 | ||
| 11 | 211082 | RESIST TERM CR YANMAR | 1,000 | ||
| 13 | 220487 | ELECT WIRES YANMAR LGTH 5000 YAN VC20 | 1,000 | 19 | |
| 14 | 218573 | ENGINE SUPPORT WEDGE LA3JH40 SO3LB | 4,000 | ||
| 15 | 252745 | ENGINE MOUNTING FLANGE GR YAN L296 | 4,000 | ||
| 16 | 43589 | EQUIP PROP SHAFT D30 | 1,000 | ||
| 17 | 189870 | STERN TUBE 40X55X 750+P EPOXY | 1,000 | ||
| 18 | 718950 | PACKING GLAND DIA 30 | 1,000 | ||
| 19 | 256972 | CHAIR KIT STRAT N2 | 1,000 | ||
| 20 | 1089 | ENGINE CONTROL CABLE L5500 | 1,000 | ||
| 21 | 1088 | ENGINE CONTROL CABLE L5000 | 1,000 | ||
| 22 | 132132 | SPACER TUBE 5X15X18 | 2,000 | ||
| 23 | G15B0230015 | GAINE POLYPROP FEND D 26 L 150 | 1,000 | ||
| 24 | 157535 | LABEL STD RIGID SUPPORT | 7,000 | ||
| 25 | 157537 | LABEL STD ASPIRATION WATER MOTOR | 1,000 | ||
| 26 | 157540 | STD LABEL STUFFING BOX SEAWATER INTAKE | 1,000 | ||
| 27 | 157541 | LABEL STD FILTER WATER MOTOR | 1,000 | ||
| 28 | 162287 | LABEL STD FILTER CARB MOTOR | 1,000 | ||
| 29 | 157545 | LABEL STD MOTOR TANK | 1,000 | ||
| 30 | 369700 | LABEL DRAINS OF COOLING WATER | 1,000 | ||
| 31 | 74192 | ETIQ POSITION CDE INVERSEUR | 1,000 | ||
| 32 | 33523 | ENGINE CONTROL LEVER TX | 1,000 | ||
| 33 | 195974 | 3-BLADED PROPELLER 17X14 RH30 E13 ER | 1,000 | 120 | |
| 33 | 245934 | 3-BLADED PROPELLER 17X14 RH30 E13 HP | 1,000 | 119 |
Exterior Decoration – Cove Stripe, Boot Stripe
Interior Lights
Salon Lights (2026 Prices + shipping)
Stove
Beneteau Oceanis 37.1 Standard Stove: ENO “Grand Large” 2-Burner Marine Stove with Oven (formerly known as the ENO Open Sea).
Key Details & Identification Features:
- Model / Part Number: 142340015301 (often referenced under series 1423 / 142340).
- Design Features:
- All-stainless steel casing and handle bar.
- 2 top burners with built-in stainless steel pan/pot holders.
- Full black glass door displaying the eno logo centered on the window.
- Three front control knobs (left burner, right burner, oven temperature) alongside an electronic push-button ignition switch on the far right.
- Standard gimbaled marine mounting setup with front crash/safety bar.
ENO does not make a factory stock cutting board cover for this stove.
However, boat owners commonly add counter space over this exact ENO Grand Large stove using a few standard options:
Universal “Noodle Boards” / Raised Stovetop Covers
You can buy universal wooden stovetop cutting boards (often called noodle boards or stovetop covers) from marine supply stores or online retailers (Amazon, Wayfair, Target):
- Key Feature to Look For: Choose models with tall/adjustable rubber feet or undercut side rails.
- Why: Standard flat boards won’t sit flush because of the raised wire pot holders and crash bar on marine stoves. Adjustable legs allow the board to straddle the wire grate securely without sliding around while underway.
Custom Marine Board (DIY or Local Woodworker)
Because of marine motion, many sailors make a custom cutting board:
- Material: Teak, StarBoard (HDPE plastic), or hard maple.
- Bottom Cleats: Route out grooves or screw rubber feet/wooden cleats on the underside that lock directly inside the ENO grate wire frame. This prevents the board from sliding off during boat movement.
To sit properly over the top of the ENO Grand Large / Open Sea 2-Burner Stove, aim for a noodle board/cover with these target dimensions:
Target Noodle Board Dimensions
- Width: 20 inches (50.8 cm)
- Depth (Front-to-Back): 16.5 to 17 inches (42 to 43 cm)
- Under-Board Clearance (Leg Height): At least 2.5 to 3 inches high
Key Fitting Considerations for This Model
- Front Safety Bar Clearance:
- A board that is 16.5″–17″ deep sits right behind the front crash/fiddled safety bar, resting directly on the top stainless ledge and wire frame.
- Pot Holder Heights:
- The built-in wire pan holders on this ENO stove extend about 1.75″ to 2″ above the stainless steel body. Ensure the board’s legs/feet give you at least 2.5″ to 3″ of clearance underneath so it doesn’t wobble on top of the burners.
- Standard Sizes to Buy Off-the-Shelf:
- Look for a 20″ x 16″ or 20″ x 17″ noodle board with raised feet/side walls.
- If buying a board with flat underside cleats/rails, place skid-proof rubber feet (at least 2.5″ tall) on the corners to lift it over the grate.
Search for “RV Stove Top Cover Board 17×20 with Adjustable Legs” on Amazon.
Multiple marine and RV accessory brands (such as RVGUARD, Garvee, and Camco) make bamboo noodle boards in this exact standard size that fit your ENO stove top setup.
Exact Keywords to Search on Amazon:
RV stove top cover 17 x 20 adjustable legs
What Makes This Specific Size Work:
- Dimensions (17″ D x 20″ W): Fits behind the ENO’s front crash/safety bar and spans across both burners.
- 3-Inch Adjustable/Removable Legs: Raises the cutting board directly over the ENO’s elevated top wire pot holders.
- Non-Slip Silica/Rubber Feet: Keeps the board securely planted on the stainless steel housing so it doesn’t slide around while underway.
Tip: Check the bottom leg clearance once received—adjust the screw-in rubber feet to clear the ENO wire grates by about 1/4 inch.