Presented by
Gulf Coast Team
1998 Carroll 40' (12.19 m) Farr 40 One Design
Sarnia, Ontario, Canada
Refit Year: 2018 Rascal
RASCAL is a Farr 40 One-Design purchased in 2016 and completely rebuilt and refit in 2018. Structurally Like New! Trades Considered Lying at Sarnia Yacht Club Competed in 2019 Port Huron - Mac and a handful of local / club races Out of water 2020 through 2022 due to Covid
Flag of Registry: Canada
- Racing Sailboat
- Sail
- Used
- Diesel
- Composite Hull
- HIN/IMO: CIR40034E898
- Stock #: 6571
Description
Murray Yacht Sales is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Swans Yacht Sales. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel
Specifications
HIN/IMO: CIR40034E898
Stock #: 6571
LOA: 40' 9'' (12.42 Meters)
Type: Sail- Used
Year: 1998
Refit Year: 2018
Beam: 13' 3''
LWL: 35' 3''
Draft Max: 8' 6''
Draft Min: 8' 6''
Sleeps: 6
Single Berths: 4
V Berths: 2
Heads: 1
Head Room: 6'
Fuel Type: Diesel
Super Structure Material: Composite
Hull Material: Composite
Hull Finish: White paint
Hull Shape: Monohull
Fuel Tank: 20 Gallons (75.71 Liters)
Fresh Water: 42 Gallons (158.99 Liters)
Displacement: 10902
Ballast Weight: 4960 lbs
Builder: Carroll Marine
Photos click to view all
Engines
Engine 1
- Engine Make: Yanmar
- Engine Model: 3GMSD30
- Engine Year: 1998
- Engine Type: Inboard
- Drive Type: Sail
- Power HP: 30.00
- Power KW: 22.37
- Fuel Type: Diesel
- Engine Location: Middle
Full Details
RASCAL
Purchased in 2016 with plan to completely rebuild the hull and deck
The rebuild has resulted in a very dry, stiff hull and deck, benefitting performance in all conditions
Minor modifications made to the standard Farr 40 design spec:
- 4" increase in waterline length resulting from straightening the stem to plumb, from raked
- Increased chamfer on sheerline for enhanced crew comfort when hiking legs out
The interior was freshened with a new paint job.
The standard interior layout lends itself equally well to both day racing and distance racing
Sails include:
- delivery/daysailing dacron mainsail
- 3 x delivery/daysailing jibs
- delivery/daysailing Code 0
- 3 x racing conditioning spinnakers
The rebuild/refit resulted in RASCAL being virtually a new boat - see details below
REBUILD & REFIT
> Hull balsa core completely replaced from bow to stern
> Bow modified to plumb from raked with 4" increase in waterline length* - for aesthetic value only
> Hull then faired and longboarded
> All deck balsa core replaced with high density fibreboard
> Added gunwhale radius molded in for greater crew comfort sitting on the rail legs out*
> Hull and deck painted with Awlgrip
> Bottom sprayed with 7 coats of VC Offshore
> Interior repainted with Petit Eazypoxy
> V-berth floorboards fabricated and installed
* these changes make RASCAL ineligible for one-design racing
> Running rigging replaced with Dyneema ropes to class specs
> Standing rod rigging entirely replaced - Offshore Spars, MI
> Lifelines replaced with ss 1x19 wire - Abbott Boatworks, ON
> Bow and stern pulpits powder coated - Whitewater Marine, MI
> All winches refurbished
> Majority of Harken blocks replaced
> New steering wheel - 2024
> New i-series Raymarine instruments - 2019
> New autopilot - Garmin Octopus model 1012 - wired, ready to install
> Engine stripped down and rebuilt with new injectors, new waterpump, new water separator, exhaust and all new hoses, clamps and gaskets
The photo gallery includes lots of photos taken at various times during the rebuild - a truly extensive, comprehensive project
ORIGINAL CARROLL MARINE SPECS & EQUIPMENT
Construction
Epoxy/E-glass/Foam/Balsa composite
We pre-preg, post cured in oven
Keel & mast support structure - aluminum grid
Keel: cast iron fin, lead bulb, epoxy coated
Mechanical
Yanmar diesel - 3GMSD30 Sail drive
2-blade folding geared prop
Fuel tank - 19.8 USG, aluminum
Fuel filter and water separator
Single lever throttle and gear control
Fuel gauge
Muffler/exhaust system
Electrical
12V DC distribution panel
Battery condition meter
Circuit breakers of appropriate amperage
Main battery switch
2 x 105Ahr batteries
80A alternator on engine
ORC approved nav lights
Red & white dome lights for general interior lighting
Halogen reading lights
Plumbing & Stove
2 x 21 USG water tanks
Cold pressure water system
Galley sink with overboard drain
2 x manual bilge pumps; cockpit and interior
Manual marine toilet with holding tank and pumpout
Fresh water fill below deck
Ice box
Stove - custom 3-burner butane
Deck Hardware
Winches:
- Primaries; 2 x Harken 48 3-speed, aluminum
- Halyard; 2 x Harken 44ST 2-speed, aluminum
- Mainsheet; 2 x Harken 44ST 2-speed, aluminum
Hydraulic backstay adjustor
Pulpits - ss custom bow & stern rails with nav lights
Stanchions - 6 x tapered, 4 with braces
Stanchion bases - custom flush fit
Lifelines - upper and lower, 1 x 19 ss
5 x rope clutches for halyards and spin pole lift
Jib tracks, port & stbd, fully adjustable with underdeck control lines
10:1 barberhauler system
Cunningham, led aft to main trimmer
Outhaul, led aft to main trimmer
'German' mainsheet system, led under deck
Spinnaker foreguy
Foredeck hatch, 24" dia, alloy
2 x cockpit opening ports, 5" x 12"
Steering
Carbon rudder stock with epoxy/carbon/e-glass blade
Upper & lower roller bearings
Optional wheel steering system - new wheel 2024
(std steering - custom alloy tiller with extension)
Spars & Rigging
I = 53.15' J = 15.45' SPL = 17.06' ISP = 60.04'
P = 54.79' E = 19.36'
Sail area = 1,109 sq ft
Custom carbon rig:
- 2 sets swept spreaders
- integrally molded deck collar
- roller bearing spin pole track
Aluminum boom with outhaul and 2 reefs
Rigid vang with tails led aft port & stbd
Carbon spin pole
Discontinuous ss rod standing rigging
Kevlar permanent backstay with hydraulic adjustor
Tuff Luff forestay foil
Running rigging:
- mainsail halyard
- 3 x forward halyards
- mainsheet
- outhaul
- cunningham
- 2 x traveller control lines
- 2 x jib sheets
- 2 x Jib in-haul lines
- 2 x jib car puller lines
- 2 x spin sheets
- 2 x spin afterguys
- 2:1 foreguy
- backstay strop
- 2 x spin twing lines
Miscellaneous Standard Equipment/Features
Exterior finish: light colour gelcoat on topsides and deck
double bootstripe
clear epoxy on bottom, ready to sand and paint
Foils epoxy coated and faired to template
Interior finished in matte white paint
4 x fixed berths with 4" cushions
Fabric covers on hanging lockers
Disclaimer
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Listing MLS by Yachtr.com
Contact Us
Want more information?
Gulf Coast Team
Gulf Coast
USA
Office: 800-826-2807
Toll Free: 1-800-826-2807
Email: info@MurrayYachtSales.com