This entry-level family cruiser has packed in everything for fun sailing

Sailing Magazine

Oceanis 30.1 drawing
Wheel Option

Here is a very interesting 30-footer—its actually 29 feet 6 inches—from Beneteau for its Oceanis series. The design is by Finot-Conq with an interior design from the Nauta Design studio.

This interior is impressive. Yes it’s tight but it’s all there. The aft double berth is big and has a hanging locker forward of it. The forward cabin takes advantage of the plumb stem and shows a more comfortable than usual double V-berth. There are two hanging lockers in this space. The settees in the main cabin look a bit narrow to my eye. This works when you are sitting up at the dining table but if you want to relax, I think more depth to the settee top is required. The starboard settee is truncated aft to make room for a small nav table. All you need now for nav gear is a laptop. The head is big, but the galley is not big. But on a 30-footer you would not expect a big galley. 

The sailplan uses a square-topped mainsail. This means there is no backstay. Instead, the spreaders are raked by what I measure as 38 degrees. That is a lot. You won’t sail downwind wing-and-wing. Instead you’ll reach and jibe, but that’s the way to get the best VMG anyway. The jib is self-tacking. Using 100% of the square-topped mainsail and the self-tacking jib areas I get a SA/D of 16.28. In addition to the self-tacking track there are deck tracks that would allow you to carry an overlapping headsail that will enhance light-air performance.

Click OCEANIS 30.1 to read Bob Perry’s entire review.


Oceanis 30.1 drawing salon looking aft
Salon looking aft
Oceanis 30.1 drawing tiller option
Tiller Option

Click to learn more about the new Oceanis 30.1