Robert Perry Yacht Design
Sailing Magazine
C&C 34 + and 34R
I’m not sure why I chose that cold and wet Friday to go for a sail, but I did and in retrospect I had a nice sail. The afternoon was punctuated by a run-in with a boat that simply looked great from every angle. It was the new C&C 34R or plus under power and on its way back to the marina. Credit C&C’s designer Rob Ball or having the confidence to give this boat strong and distinctive lines. As the boat slipped away and I admired it one last time from the quarter, all I could think of was I wish I hade designed it.
Let’s dissect this design and see just what makes it so successful, I don’t have any meaningful race results at this time, so I am not going to comment on the comparative speed of this boat. Initial indications are that the boat has plenty of speed, but keep in mind that it is in a very competitive size range and will go head to head against some of the newest and hottest IMS boats. Our discussion will focus on the design as seen on paper, being cognizant of the many variables, such as skipper, crew, sails, etc., that go into making a race winner.
Rob Ball has had but one job and that has been as a yacht designer for C&C. Rob started here in high school and has stayed with the company through various changes in management to the point where he has been chief designer for several years. So while the brochures give no individual credit for design, you can assume that you are looking at the work of Rob Ball when you see a new C&C. Of course Rob owes some of his skill to the very long list of talented designers that have also worked at C&C, not the least of which were the two Cs, George Cuthbertson and George Cassian. Ball has been well trained. READ REVIEW
http://www.cncphotoalbum.com/reviews/perry/c&c34.htm
————————————————————————————————-
Hull Type: |
Fin w/bulb & spade rudder |
Rig Type: |
Masthead Sloop |
LOA: |
34.08′ / 10.39m |
LWL: |
30.58′ / 9.32m |
Beam: |
11.58′ / 3.53m |
Listed SA: |
669 ft2 / 62.15 m2 |
Draft (max.) |
7.42′ / 2.26m |
Draft (min.) |
|
Disp. |
12000 lbs./ 5443 kgs. |
Ballast: |
4700 lbs. / 2132 kgs. |
SA/Disp.: |
20.49 |
Bal./Disp.: |
39.17% |
Disp./Len.: |
187.34 |
Designer: |
Robert Ball |
Builder: |
C&C Yachts |
Construct.: |
FG+KEV w/balsa cored hull & deck |
Bal. type: |
Lead |
First Built: |
1989 |
Last Built: |
|
# Built: |
|
AUXILIARY POWER (orig. equip.) |
Make: |
Universal |
Model: |
M-25 |
Type: |
Diesel |
HP: |
30 |
TANKS |
Water: |
60 gals. / 227 ltrs. |
Fuel: |
40 gals. / 151 ltrs. |
RIG DIMENSIONS KEY |
I: |
48.67′ / 14.83m |
J: |
14.83′ / 4.52m |
P: |
42.50′ / 12.95m |
E: |
14.50′ / 4.42m |
PY: |
|
EY: |
|
SPL: |
|
ISP: |
|
SA(Fore.): |
360.89 ft2 / 33.53 m2 |
SA(Main): |
308.13 ft2 / 28.62 m2 |
Total(calc.)SA: |
669.01 ft2 / 62.15 m2 |
DL ratio: |
187.34 |
SA/Disp: |
20.49 |
Est. Forestay Len.: |
50.88′ / 15.51m |
BUILDERS (past & present) |
More about & boats built by: |
C&C Yachts |
DESIGNER |
More about & boats designed by: |
Robert Ball |
RELATED LINKS |
C&C Yachts photo album |
www.cncphotoalbum.com |
NOTES |
Rig and keel dimensions were changed a number of times during the production run of this boat. |
|
———————————————————————————————–
1 Comment