1956 Sparkman & Stephens 30' _{(9.14 m)} Gulfstream 30

Principle Dimensions and Information

Designer: Sparkman and Stephens

Builder: Robert E. Derecktor, Inc.

Year Built: 1956

LOA: 29’, 6”

LWL: 21’, 10”

Beam: 8’, 0”

Draft: 4’, 8”

Ballast: 3,000 lbs. (lead)

Displacement: 7,700 lbs.

Sail Area: 390 sq. ft.

Auxiliary Propulsion: 2011, Universal Diesel, 25HP

Engine Hours: 295 Hours (Spring 2023)

Fuel Capacity: 15 Gallons

Freshwater Capacity: 18 Gallons

Hull and deck Construction

Full fin keel with cut-away forefoot and keel hung rudder underwater configuration.

Honduras Mahogany planking over White Oak frames

White Oak backbone, dead wood, stem, stern post, and other hull and deck structural members.

Cast Bronze floors.

Decks and cabin top are marine plywood overlaid with fiberglass and painted surface

Toe rails, taff rail, house sides and cockpit coamings are of varnished Mahogany.

Deck Hardware

Bronze bow pulpit

Bronze lifeline stanchions

Double (upper coated & lower wire ) lifelines.

Interior Arrangement and Accomodations

The Gulfstream 30’s are surprisingly spacious for a boat of its size and type and allows for comfortable cruising by up to four adults and more if some of the crew like sleeping under the stars.

Step Lively is a wonderful example of the class with her interior done in the Herreshoff style of white painted bulkheads, joinery, hull interiors and overheads painted White with accenting varnished Mahogany trim on bulkheads and locker fronts with varnished White Oak deck and cabin beams overhead.

Galley Equipment

Stainless steel sink basin

Origo two burner stove.

Sea swing propane stove.

Rebuilt ice chest and countertop.

Spars and Rigging

Single-spreader, masthead sloop rig configuration

Keel stepped, hollow-box construction varnished Sitka Spruce mast

Solid section (round) varnished Sitka Spruce boom

Varnished Sitka Spruce spinnaker pole

1x19 Stainless steel wire standing rigging (shrouds and stays) with bronze turnbuckle adjusters.

Sail Trim and Sail Handling Equipment

Masthead wind indicator / Windex

Harken Mark IV roller furling headstay with Harken guide blocks leading to cockpit.

Mainsail slab reefing system (New in 2021)

Primary sheets winches, Harken bronze self-tailing (2ea), cockpit location

Halyard winches, Merriman #2 bronze (2ea) for main and jib halyards, mast location

Boom downhaul Merriman #1 bronze, cabin top location

Spare handles for all winches.

1” bronze T track with two wooden shell stand-up blocks on toe rail.

Two sets of cars on tracks.

Two wooden shelled snatch blocks.

Two Nicro soft snatch blocks.

Jib sheets, spinnaker sheets, spinnaker twing lines and halyards recently replaced.

Sails and Canvas

Mainsail, Pope Sails, 2021

155% Genoa, Pope Sails, 2022

130% Genoa, Pope Sails, 2017

110% Working Jib, Pope Sails, 2018

.75 oz Spinnakers, Hood Sailmakers

.75 oz Spinnaker with spinnaker sock, Shore Sails

Older mainsail and heavy weather jib.

Mainsail cover

Companionway dodger

Cockpit cushions (new foam 2022).

Electronics and Navigational Equipment

Danforth Constellation helm compass

Garmin chart plotter on companionway swing-out bracket

Garmin depth finder on companionway swing-out bracket.

Horizon VHF radio with masthead antenna.

New VHF antennae cable (2022).

Auxiliary Propulsion and Fuel

2011 Universal 25 Hp Diesel engine.

Engine Hours: 295 hours (Spring 2023)

Vari-prop 3 bladed feathering propeller

15 Gallon fuel tank capacity

Steering

Varnished tiller

Keel-hung rudder

Electrical System

Separate battery banks for engine start and house systems

Two Deep cycle Marine Batteries, new 2021.

Guest primary battery selector switch

Circuit panel for control of all house circuits.

Battery charging by engine alternator

Plumbing and Sanitation

18 Gallon freshwater capacity

Stainless steel sink basin

Pressure water at sink basin

Thetford porta-pottie hidden under V-berth seat with privacy curtain

Ground Tackle

Rockna anchor

200’ of 5/8” Nylon anchor rode

Dewatering Equipment

Rule Automatic bilge pump.

Whale Gusher manual bilge pump

Additional Equipment

Dock lines and spring lines.

Fenders (2ea)

Fender board (1ea)

Boat hook

Refit, Restoration and Significant Work History

1999-2004 Hull and Deck Refit and Restoration

Upon acquisition by the current owners STEP LIVELY benefitted greatly from an extensive refit and restoration work performed by Anders Langendal of Greenport (Long Island) NY beginning in 1999 and completed in 2004. The following list of work performed during this period of time.

Repairs to keel and sternpost, replacement of top section of stem, new transom and rim log, repairs to planking hood ends at bow and stern.

New mast step incorporating new floor timbers to distribute load with lead ballast cast to fit in mast step extension.

Removal and re-installation of all cast bronze floors.

Extensive repairs to frames throughout.

New engine beds, engine re-installed.

Removal, repair and re installation of fuel and water systems.

New bottom planking from garboard to turn of the bilge. Remaining bottom planking was refastened.

New fiberglass decks and cabin top, new toe rails and trim.

Cabin trunk, coamings and hatches removed and re-bedded.

Aft end of cabin replaced.

Complete rebuild of cockpit to original S & S specifications (with storage locker access at seating).

Complete renewal of electrical system.

Keel bolts checked.

New forward keel bolts incorporated into new mast step.

Lead transition ballast installed at forward edge of lead ballast keel.

2013-2023 Significant Work

The following work was done by and/or with the supervision of Riverside Boat Company of Newcastle, Maine

2013: Repair and / or sister of cracked frames

2015: Replace cockpit coamings

2016: Replace keel bolts not replaced during earlier refit (all keel bolts now replaced)

2017: Replace rudder, recondition propeller and shaft, install new cutlass bearing

2023: Replace manual bilge pump with new Whale Gusher pump, replace exhaust elbow, install new raw water impellor

Disclaimer

Brooklin Boat Yard offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.